MSRP: $119.00 USD | Product # 8003071 | Buy Online
If you’re pinching pennies, you might have to pinch yourself over your ability to afford this newly redesigned classic. Try to resist the urge to pinch your retailer, though.
MSRP: $119.00 USD | Product # 8003071 | Buy Online
If you’re pinching pennies, you might have to pinch yourself over your ability to afford this newly redesigned classic. Try to resist the urge to pinch your retailer, though.
Q: What does the SkiLift do?
A: The SkiLift increases roof clearance so that skis and boards with tall bindings can be placed with the bindings pointed down, to maximize carrying capacity. It is installed on one end of both the front and rear mounts so that the mounts are raised up 3-1/2” on that end and angled away from the roof.
Q: How far apart should my crossbars be?
A: The recommended crossbar spread for skis under 170 cm is 12-24". The recommended spread for skis over the 170 cm is 12-36". If you are using Q Towers, or any other application where the rack is positioned in specified locations, do not change the position of the rack.
Q: How does it lock?
A: Add SKS lock cores to secure skis and snowboards in the rack and then mount to the crossbar. Two lock cores, one for the front and one for the rear, will do the trick, since once the mount is closed and locked, the Hex Keys (wing nuts) can not be unscrewed. Be sure to keep factory installed rack crossbars fairly close together (24-36") so that the bindings will prevent someone from forcing the skis or snowboards out of the mounts one end at a time. Note that the crossbars of some vehicle’s built in racks are not locked and can easily be removed or slid apart.
Q: My Crossbars are so close together that I can’t get my bindings between the mounts, what should I do?
A: Position them so that the rear mount closes between the toe and heel of ski bindings or between the front and rear bindings on snowboards. Both can be carried on as little as 12" of crossbar spread.
Q: Skis "Tips" forward or back?
A: Ski tips must face rear of vehicle.
Q: I can't get my PowderHound to close all the way; is something wrong?
A: When closing the PowderHound, one should hear one or more distinct clicks. Always check the mount before driving away by pulling firmly upward on the top of the mount. When properly closed to even just one click, it won't budge. The PowderHound is designed to automatically adjust to variable heights to accommodate different thicknesses of ski and snowboards so it may click only once or up to 4 times.
MSRP: $119.00 USD
Product#: 8003071
The classic PowderHound design with the addition of new Universal mounting hardware and a sleek new look. Carries up to 4 pairs
of skis or 2 snowboards.
Compatible with many original equipment racks.
Produced: 2006 to present
History: Similar to the PowderHound SE with added Universal Mounting Hardware and new look.
General Information:
Weight: 5.7lbs
Dimensions:
Width=2.75"
Length=22.5"
Height=4.25"
Capacity: Up to 4 pairs skis, 2 snowboards
 
We are commited to minimizing our impact on the environment.
Click here to learn more »
|
8810072
RPL, Q-CLIP VINYL PADS
| 
8860037
RPL, SKI LIFT KIT, GEN III
| 
8860040
RPL, SL MT, UNI
|
| 
8860041
RPL, HDW, SL MT, UNI
| 
8860042
RPL, HDW, BOLTS, SKI MT 06
| 
8860052
RPL, AERO PADS
|
|
 |
 
|
